32770 This will end your Network Client Administrator session.
32771 Copying files from the CD to formatted, high-density system disks...
32772 You cannot install remoteboot workstations using the Network Client Administrator utility. Follow the directions described in the "Windows NT Networking Guide" in the "Windows NT Server Resource Kit" version 4.0.
32773 Copying files from the CD to the destination drive...
32774 Insert a formatted, high-density system disk into drive A.
32775 Insert a formatted, high-density system disk into drive B.
32776 The directory specified is not a shared directory. Press OK if you would like to continue or Cancel to go back and share it.
32777 The directory specified on the server is not a shared directory. It must be shared to perform the Over the Network installation.
32778 The path specified cannot be found. Verify that the path is correct, then retry the operation.
32779 The path specified is not valid. Verify that the path is correct.
32780 The path specified is blank. Enter a correct path, then retry the operation.
32781 Sharing the distribution directory.
32782 NCDU -- Filler
32783 The path specified does not contain the network client installation files. Verify that the path is correct, then retry the operation.
32784 The share name you specified is not valid. You must enter a valid share name to continue with this selection.
32785 This floppy drive is not supported. The files will have to be copied manually.
32786 Unable to connect to specified server. Press OK to continue using the default values found on this workstation or press Cancel to reenter the server's computer name.
32787 An invalid computer name was indicated. Reenter a proper computer name.
32788 The network client installation files have not been copied to a suitable floppy disk. Copy the files from their temporary path to a formatted, high-density system disk and verify that the disk fits the target workstation's drive A.
32789 The destination drive you selected does not match the drive format of the target workstation's drive A. Press OK to continue.
32790 There is not enough free space on the specified destination drive to copy the selected files. Delete any files you are not using on the destination drive, or specify a different destination drive, then retry the operation.
32791 The target disk is not a system disk. Insert a formatted, high-density system disk in the destination drive then press OK to continue or press Cancel to pause NCADMIN and create a system disk on an appropriate DOS system.
32792 An invalid source directory was indicated. Type a valid source directory using the format x:\directory where x a local drive and directory is the shared directory containing the network client installation files.
32793 An error occurred when copying the installation files to the destination drive. Verify that the destination drive has enough available free space and that you have sufficient permission to access the shared directory, then retry the operation.
32794 You have chosen to cancel the file copy operation. This action will result in an incomplete destination directory or disk. Press OK to stop copying files or Cancel to resume copying files.
32795 An invalid subnet mask was indicated. Type a valid subnet mask using the format n.n.n.n where n is a decimal number between 0 and 255 inclusive.
32796 An invalid IP address was indicated. Type a valid IP address using the format n.n.n.n where n is a decimal number between 0 and 255 inclusive.
32797 The system disk in the destination drive may be incorrectly configured. Verify that it is correctly configured before using it to start the target workstation.
32798 The network adapter card was configured using default settings. Verify that the default settings are the settings that should be used and modify them if necessary.
32799 You trying to install an older version of network clients than is compatible with this application. Please obtain a current version of the network client utilities and retry the operation.
32800 An error occurred while sharing specified directory. Verify that you have sufficient permission to perform this operation, then contact your system administrator.
32801 An invalid default gateway was indicated. Type a valid default gateway using the format n.n.n.n where n is a decimal number between 0 and 255 inclusive.
32802 Do you want to copy the Network Administration Utilities to the system?
32803 There was not enough memory to complete your request. Free memory by closing files and programs you no longer are using.
32804 Make sure you have sufficient permission to access this shared directory. Contact your system administrator about changing privilege levels.
32805 The protocol you selected is not available on the server where the network client installation files are located or the protocol cannot support an over the network installation. Press OK to use this protocol or Cancel to return to the previous screen.
32806 Insert a formatted, high-density system disk in the destination drive. Press OK to continue.
32807 The utility was unable to confirm the destination drive type. Verify that the network client installation files have been copied to formatted, high-density system disks. Press OK to continue.
32808 The files have been successfully copied. Press OK to continue.
32809 The files have been successfully copied to the over the network installation disk. Press OK to continue.
32810 The Network Administration Tools are now available on a shared directory. Press OK to continue.
32811 If you've selected NetBEUI as the protocol to install the client over the network with, remember that the target workstation must be on the same network as the server.
32814 The drive you've selected to share is not on this machine. Only drives on this machine may be shared.
32815 The share name selected is not currently in use.
32816 The share name selected is defined as a Network Client Distribution directory tree.
32817 The share name selected is defined as a Network Server Tools directory tree.
32818 The share name selected is defined to share a directory tree not related to the Network Client Administrator tool
32819 Unable to locate the specified server, check the server name or status of the server.
32820 Enter the name of the server that already has a shared directory on it.
32821 The share name entered may not be accessible from some MS-DOS workstations.
32822 The path specified does not contain the network administration tools installation files. Verify that the path is correct, then retry the operation.
32823 Network Client Admin Tools Directory
32824 Network Client Distribution Directory
32825 Network Client Destination Path
32826 Searching for Client-based Network Administration Tools in
32827 Be sure to enter a unique computer name on startup disk for each machine being configured over the network.
32828 This disk is not complete and should not be used for an installation.
32829 Unable to read the selected drive. Make sure the drive door is closed and the disk is formatted and free of errors.
32830 Unable to share this path. Re-enter another path and retry the operation.
32831 If you get an error message that there is not enough memory to run Setup when installing either Windows for Workgroups or the Network Client for MS-DOS over the network, modify the boot floppy's CONFIG.SYS file to use extended memory. For example, EMM386.EXE and HIMEM.SYS provide extended memory for MS-DOS 5.0 and above. If you do not have extended memory, you must use NetBEUI or IPX because more conventional memory is available for Setup to run.
32834 \Device\NwlnkIpx
32835 \Device\NetBT_
32836 \Device\Nbf_
32837 The destination disk for the Over the Network Client installation may not have enough space to later add the system files that will make the disk bootable. Press OK to continue and use the selected destination.
32838 The Over the Network Client installation disk may not have enough space to later add the system files that will make the disk bootable. The files on the disk will need to be copied to a larger system disk before using.
36865 Network Client Administrator
36866 ERROR: %d occurred while trying to create share.\n%s
36867 &About...
36868 Configuring the %s installation disk. Copying installation files to %s
36869 The installation disk will use the %s on the %s Network Adapter.
36870 After the workstation starts and connects to the server, %s will be installed on the target workstation.
36871 The installation disk will log in as %s to the %s domain.
36872 The user will be prompted for a login name when the system starts to the %s domain.
36873 Floppy IP Address is: %d.%d.%d.%d with subnet mask of %d.%d.%d.%d and using the Default Gateway Address of %d.%d.%d.%d.
36874 Floppy IP address and subnet mask will be selected using the DHCP utility.
36875 Working...
36876 %d %% Complete
36877 0 % Complete
36878 Preparing to copy: %s\nFrom: %s (0x%8.8x)\nTo: %s (0x%8.8x)\n Using Copy Flags: (0x%8.8x)\nPress OK to continue or Cancel to abort.
36880 Load the %s %s in Drive %s and press OK
36881 %s, %s
36882 %d directories were created and %d files have been successfully copied. Press OK to continue.
36883 Insert Floppy
36884 1 Disk Required
36885 %d Disks Required
36886 <internal buffer>
36887 rem Connecting to distribution drive command goes here
36888 echo Running Setup...
36889 rem OTN Setup command goes here
36890 Files for Over the Network Installation Disk
36891 %d K
36892 %d MB
36893 Client Distribution Information Files
36894 <none>
36895 Network Client Distribution Share
36896 Network Server Tools Distribution Share
36897 Share Name: %s is already used on machine \\%s to share the Network Client Tree %s.\n\nClick OK to use this path or Cancel to enter a new share name.
36898 Share Name: %s is already used on machine \\%s to share path %s.\n\nPlease enter another share name.
36899 SetupAdm
36900 Share Name: %s is already used on machine \\%s to share the Network Server Tools Dir: %s.\n\nClick OK to use this path or Cancel to enter a new share name.
36901 the System Registry
36902 Shared Directories
36903 Hard Disk Root Directories
36904 the CD-ROM
36905 the local machine
36907 Domain Admins
36908 WindowsForWorkgroups
36909 LAN Manager
36910 MS Network Client
36911 Network Client Distribution Directory
36912 Installation Disk Files Destination Path
36913 Network Client Destination Path
36914 NWLink IPX Compatible Protocol
36915 TCP/IP Protocol
36916 NetBEUI Protocol
36917 Network Administration Utilities
36918 Unable to copy this file. Select OK to skip or Cancel to abort
36919 An error occured while trying to copy files. Check for adequate disk space and valid permissions on the destination directory.
36920 About Network Client Administrator
36921 3.5" HD
36922 5.25" HD
36923 Clients
36924 Windows95
36925 WindowsNT
40962 Unable to load a library required for this operation.
40963 This operation will erase ALL data from the destination disk. Are you sure you want to continue?
40964 Confirm Format
40965 Unable to format disk.\n\nMake sure the disk is in the drive and not write-protected, damaged, or of wrong density rating.
40966 Formatting Destination Disk
40967 Copying Disk
40968 Quick Formatting...
40969 Percent Complete
40970 Copy Disk
40971 Insert destination disk.
40972 Insert source disk.
40973 Insert source and destination disks.
40974 Incompatible file system.
40975 Access denied.
40976 The disk is write-protected.
40977 Cannot lock volume.
40978 Cannot quick format disk.\n\nMake sure the disk is the correct density rating.
40979 IO error on the source disk.
40980 IO error on the destination disk.
40981 IO error on both the source and destination disks.
40982 An IO error has occurred.
40985 Cannot label the disk.\n\nThe specified label is invalid. Make sure the label does not contain any of the following characters\n[space] * ? / \ | . , ; : + = [ ] ( ) & ^ < > "
40986 Source and destination disks are incompatible.
40987 Format Disk Error
40988 Cannot perform a quick format.\n\nContinue with normal format?
40991 Format Complete
40992 %ld bytes total disk space\n%ld bytes available on disk\n\nDo you want to format another disk?
40993 Select OK to retry the format and copy or Cancel to leave.
